11 products

Geekvape

GeekVape UK stock spans one of the market's more varied hardware lineups, built around three distinct families: the shockproof Aegis series for anyone hard on their gear, the pocket-friendly Wenax and Sonder pods for everyday MTL vaping, and the Zeus tank range for flavour-focused sub-ohm setups. Since launching the original Aegis, GeekVape has kept adding to that spread rather than replacing it, so there's genuinely something here for a first-time vaper and a seasoned tinkerer alike.

At Vape Portal UK, our GeekVape collection brings together the current Aegis, Wenax, and Sonder kits, alongside the replacement coils and pods that keep them running, all genuine stock.

 

What Makes GeekVape Vapes Stand Out

GeekVape vape kits earned their reputation for toughness first. The Aegis name has become shorthand for shock-, dust-, and water-resistant hardware, with several models carrying full IP67 or IP68 certification, genuinely rated to survive a drop or a splash rather than just marketed that way. That build quality runs through GeekVape's AS-series chipsets too, which fire quickly and hold power steady even as the battery runs down.

Away from the rugged end of the range, the Wenax and Sonder families take the opposite approach: small, simple pods built around the shared Q cartridge platform, so a coil or pod bought for one device will often work in the other. That kind of cross-compatibility keeps things straightforward if you're switching between the two ranges or just want to keep a small stock of spares.

GeekVape and UK TPD Compliance

Every GeekVape device and pod sold through Vape Portal UK meets UK TPD standards, with tank and pod capacities held to the 2ml limit and full, clear labelling on nicotine strength and ingredients. GeekVape has supplied the UK market for years, so compliance is built into the hardware design rather than adjusted after the fact.

How GeekVape's Pods and Tanks Work

The Wenax and Sonder ranges use the Q pod system: a cartridge with the coil built in clicks or slides into the device, and once flavour starts fading, the whole pod gets replaced. Some Wenax pods fill from the side, others from the top, but the principle's the same either way: no separate coil to fiddle with, just swap the cartridge.

The Aegis Boost pod mods work a little differently, using a magnetic cartridge with a removable coil rather than a sealed unit, so you can replace just the coil if you'd rather not throw away the whole pod. The Aegis Legend and other tank-based kits go further still, pairing with GeekVape's own Zeus tanks, where the coil is fully independent of the tank body and swaps out on its own.

Choosing E-Liquid for a GeekVape Kit

Because virtually every current GeekVape device is refillable, the e-liquid is entirely up to you. The Q pods used across the Wenax and Sonder ranges are built around 0.4–1.2 Ω resistances designed for 50/50 nic salts, giving a smooth, satisfying throat hit. The lower-resistance B and Z series coils used in the Aegis Boost and Legend ranges, on the other hand, are designed for higher-VG short fills, since they're pushing considerably more vapour per puff than a standard MTL coil is built to handle.

Explore the Popular Geekvape Pod Kits UK Range

Here's a look at the main devices you'll find in our GeekVape collection.

GeekVape Sonder Q2

The Sonder Q2 is about as close to plug-and-play as GeekVape gets: no buttons, no settings, just draw and go. A 1350mAh battery and 30W max output run through the Q pod family, with a multicoloured LED ring doubling as a rough battery indicator. It's the kit GeekVape itself points first-time vapers towards first.

GeekVape Wenax K2

The Wenax K2 keeps things pocket-sized and simple, a slim, all-metal pen shape built around a 1000mAh battery and three power levels between 7W and 18W. It shares its cartridge with the earlier Wenax K1, uses 0.8Ω and 1.2Ω coils for a tight MTL draw, and supports both auto-draw and button firing depending on which you'd rather use day-to-day.

Geekvape Wenax Q2

The Wenax Q2 dresses the same Q pod platform up considerably, with genuine leather panelling, a small OLED screen, and a 1250mAh battery pushing up to 30W. A three-level airflow slider lets you shift between a tight MTL pull and a looser RDL draw, and both draw-activation and a physical button are supported depending on how you prefer to fire it.

Geekvape Aegis Hero 2 (H45)

The Aegis Hero 2 brings the Aegis family's IP67 durability down into a genuinely compact pod-mod shape. A 1400mAh battery runs 5–45W through a 4ml top-fill pod and GeekVape's B series coils, with a 0.96-inch TFT screen for keeping an eye on wattage and battery. It sits between the simpler Wenax and Sonder pods and the bigger Aegis Boost 3, giving a bit more adjustability without stepping up to a full pod-mod's battery size.

Geekvape Aegis Boost 3

The Boost 3 moves into pod-mod territory, with a 3000mAh battery, adjustable output up to 60W, and IP68 tri-proof protection against water, dust, and shock. Its biosensing lock automatically unlocks in your hand and locks again once you put it down, and a magnetic cartridge with a removable coil gives it more flexibility than a typical sealed pod.

Geekvape Aegis Legend 5

The current flagship of the Aegis line, the Legend 5, runs on dual external 18650 batteries for up to 200W, wrapped in the same IP68-rated tri-proof body the range is known for. It ships with GeekVape's Z Sub-Ohm tank and Z Series mesh coils, giving proper cloud and flavour output for anyone who's outgrown a pod kit entirely, with Smart, Power, Boost, Eco and TC modes covering pretty much every way you might want to vape.

A Sneak Peek at the Rest of the GeekVape Range

Beyond the kits themselves, our GeekVape Replacement Coils and Pods cover everything above. Q pods across the full resistance range for the Wenax and Sonder ranges, B series coils for the Aegis Hero 2 and Boost 3, and Z series mesh coils for the Legend 5 and other Zeus tank-based kits. GeekVape also makes a handful of other devices beyond what's covered here, including the Digi range and the Zeus tanks sold separately for anyone building their own setup, worth a browse if you're after something specific for a GeekVape device you already own.

GeekVape Pod and Tank Capacity: What to Expect

Since nearly every GeekVape device here is refillable rather than sealed, there's no fixed advertised puff count. How long a pod or tank lasts depends on wattage, resistance, and how often you're vaping. Here's a rough guide to capacity and typical coil life across the range:

  • Geekvape Sonder Q2: 2 ml pod(TPD), coils typically last one to two weeks
  • Geekvape Wenax K2: 2ml pod, coils typically last 7–10 days
  • Geekvape Wenax Q2: 2 ml pod (TPD), coils typically last one to two weeks
  • Geekvape Aegis Hero 2 (H45): 2 ml pod (TPD), coils typically last two to three weeks
  • Geekvape Aegis Boost 3: 2 ml pod (TPD), coils typically last 14–21 days
  • Geekvape Aegis Legend 5: 2 ml pod (TPD), Z series coils typically last 14–21 days

Higher-wattage Z series coils on the Legend 5, and B series coils on the Boost 3 will generally need replacing sooner than the low-power Q pods used across the Wenax and Sonder ranges, since they're processing more e-liquid per puff.

Comparing GeekVape Prices at Vape Portal UK

GeekVape's pricing has always stretched across a genuinely wide bracket, and that's reflected in the current range: a Sonder Q2 sits firmly at the affordable, entry-level end, while the Legend 5 costs more in line with what you'd expect from a dual-battery mod capable of 200W. Because everything here is refillable, the ongoing cost stays low either way: a coil every week or two works out considerably cheaper than replacing whole prefilled pods or devices. At Vape Portal UK, we keep pricing across the full GeekVape range competitive.

With our GeekVape collection, you get:

  • The full current range of GeekVape pod kits, pod mods and mods
  • 100% genuine, TPD-compliant GeekVape hardware
  • Competitive prices across every device
  • Cross-compatible Q pods that keep spares simple
  • Refillable, reusable systems built to last
  • Fast UK delivery
  • Clear, honest product information
  • Products intended for adult customers aged 18 and over

Find Your Geekvape Vape at Vape Portal UK

From the effortless Sonder Q2, Wenax K2 and Wenax Q2, through the more adjustable Aegis Hero 2 and rugged Aegis Boost 3, up to the flagship Aegis Legend 5, GeekVape's range covers pretty much every kind of vaper, whichever end of the MTL-to-DTL spectrum you sit on. Browse the full GeekVape collection at Vape Portal UK to find genuine kits and replacement coils at a fair price, with fast delivery across the UK.

GeekVape nicotine products are intended for adults aged 18 and over. Nicotine is addictive. Always follow the manufacturer's instructions and applicable UK regulations. Battery and coil lifespan will vary according to individual usage.

Frequently Asked Questions

Make sure the pod's fully clicked or slid into place first, since a loose connection is the most common cause. If that's fine, charge the device fully, as some Q pod devices stop firing below a certain battery level rather than just running weaker. New pods can also have a small seal covering the airflow that needs removing before first use.

Usually it's a sign the coil's run dry, or it's simply reached the end of its life. Check that the cartridge hasn't been left empty and that it's sitting upright, and top it back up if needed. If it's properly filled and still tastes burnt, the coil inside the cartridge will need swapping; B series coils typically last two to three weeks depending on wattage.

This is usually down to overfilling past the marked line or refilling while the pod's still warm from recent use. Make sure the fill port is pushed back in properly, and let a freshly filled pod sit for a minute before vaping again. A cracked pod will leak regardless of how carefully it's filled, so if the problem continues, it's simplest to replace it.

This usually means the coil isn't making proper contact, or its resistance falls outside what the device supports. Remove the pod or tank, check the connection pins for any residue, and refit it firmly. If the error persists with a coil you know is compatible, try a different one to rule out a fault with that specific coil.

It depends on the coil type and how hard it's run, but as a rough guide, Q pods across the Wenax and Sonder ranges typically last one to two weeks, while the higher-wattage B and Z series coils used in the Aegis range tend to last two to three weeks. Fading flavour or a burnt edge creeping in are the usual signs it's time for a fresh one.

Generally yes, both ranges share the Q pod platform, so a cartridge bought for one will usually work in the other, provided the resistance falls within what your specific device supports. The Wenax K2 uses its own K1-compatible cartridge rather than a Q pod, and coils from the Aegis Hero 2, Boost, or Legend ranges don't cross over either, since those use entirely different B and Z series platforms.

A degree of warmth is completely normal when running dual-battery mods at higher wattages, particularly with the battery door closed. It isn't normal for the device to feel genuinely hot, swell, or produce any odd smell. If that happens, stop using it, remove the batteries if it's safe to do so, and don't attempt to open the mod yourself.

For the Wenax and Sonder ranges, a 50/50 nic salt suits the tight MTL to RDL draw these pods are built around. If you're running an Aegis Boost or Legend 5 with a lower-resistance B or Z series coil instead, switch to a higher-VG shortfill, since those coils are designed to handle considerably more vapour production.

Genuine GeekVape hardware typically carries a manufacturer warranty covering faults with the battery or device itself, though pods, tanks and coils are treated as consumables and fall outside that cover. If you think a device has a genuine fault rather than expected wear, get in touch, and we'll help sort it out.

It's a bigger step up than the Wenax or Sonder ranges, but it's not unmanageable. Smart mode reads the coil you've fitted and sets a sensible baseline automatically, so you're not left guessing at wattage from the start. Most people move up to something like the Legend 5 once they've got a feel for their preferred draw style from a simpler pod kit first.