The Veynom EX kit from Aspire is a pod mod that runs on a single external 18650, 20700, or 21700 battery, none of which are included, delivering a 1-100 W output through Aspire's ASP chipset. The 5 ml pod (2 ml in TPD) fills through a screw-to-open top cap and is compatible with Aspire's BP mesh coil range, covering MTL, RDTL and DTL vaping from the same device. A 0.96-inch TFT colour screen displays wattage, mode and battery information, and six customisable lighting effects run around the fire button. Charging is handled through USB-C. The Aspire Veynom EX Kit is available at £28.99 from Vape Portal UK.
Airflow and Power, Set the Same Way
Adjusting airflow on the Veynom EX doesn't involve a separate ring or slider; the entire pod rotates while seated on the device, opening or closing the draw directly. This is paired with a genuinely unusual power option: Custom Power Setting (CPS) mode lets you program several wattage levels in sequence, so a single puff can move through, say, a lower opening wattage into a stronger finish, rather than firing at one flat power throughout. Auto mode exists for anyone who'd rather the device read the coil and pick a wattage on its own.
Output Modes Available
● AUTO: Reads the fitted coil's resistance and sets wattage automatically
● WATT: Manual variable wattage, adjustable across the full 1-100W range
● VOLTAGE: Manual variable voltage control
● BYPASS: Output tied directly to battery voltage
● TC: Temperature control, usable with compatible nickel, titanium or stainless steel coils between 100 and 315°C.
● CPS: Custom Power Setting, sequencing multiple wattage levels within a single puff
Key Specs
● Battery: single 18650, 20700 or 21700 (not included)
● Power output: 1-100 W
● Output voltage: 0.5-9.0 V
● Charging: USB-C
● Pod capacity: 5 ml (2 ml TPD-regulated), screw-to-open top-fill
● Coil compatibility: Aspire BP series
● Coils included: 0.15 ohm BP mesh (60-80 W), 0.3 ohm BP mesh (30-40 W)
● Screen: 0.96-inch TFT colour display
● Lighting: 6 adjustable effects
Features and Benefits
Firing is button-activated, and the screen cycles through wattage, selected mode, coil resistance and battery percentage as the device is used. Rotating the pod itself adjusts airflow without needing a separate control, so switching from a tighter MTL draw to a more open DTL pull is done in one motion. Coils pull out and press back in without threading, and the included 18650 battery adapter means a smaller cell can be used in the same pod chamber built for larger 21700 batteries. A continuous fire time of around 10 seconds is built in as a safety cut-off for longer draws.
What's in the Box?
● 1 x Aspire Veynom EX device
● 1 x Veynom pod (5 ml)
● 1 x BP 0.15 ohm mesh coil (pre-installed, 60-80 W)
● 1 x BP 0.3 ohm mesh coil (30-40 W)
● 1 x 18650 battery adapter (pre-installed)
● 1 x USB Type-C cable
● 1 x user manual
Complete Specifications Table
|
Specifications
|
Details
|
|
Power output
|
1-100W
|
|
Output voltage
|
0.5-9.0V
|
|
Chipset
|
ASP
|
|
Battery
|
Single 18650, 20700 or 21700, sold separately
|
|
Charging
|
USB-C, up to 2A
|
|
Pod capacity
|
5.0 ml (2.0 ml in TPD-regulated regions)
|
|
Coil compatibility
|
Aspire BP series
|
|
Coils included
|
0.15 ohm BP mesh (60-80 W) and 0.3 ohm BP mesh (30-40 W)
|
|
Output modes
|
AUTO, WATT, VOLTAGE, BYPASS, TC, CPS
|
|
Temperature control range
|
100-315°C
|
|
Airflow control
|
Rotating pod
|
|
Display
|
0.96-inch TFT colour screen
|
|
Draw style
|
MTL, RDTL and DTL
|
|
Available colours
|
8 colourways
|
Colour Options
There are 8 total official colourways for the Aspire Veynom EX Kit:
● Black
● Gunmetal
● Silver
● Rainbow
● Metallic Fade
● Chrome Blue Fade
● Gold Pink Fade
● Teal Purple Fade
