Compact mods usually mean stripped-back features, but the Geekvape Aegis Mini 2 Mod Kit packs a genuinely advanced mode list into a body small enough for a pocket. Built on a 2500 mAh internal battery with a 5-100 W output range, the zinc alloy chassis carries IP68 tri-proof protection against water, dust and drops and pairs with the Z Nano 2 tank, a 3.5 ml top-fill tank running GeekVape's B Series coils. A 1.08-inch colour screen shows wattage and battery status, and charging runs through a USB-C port hidden under a waterproof flip cover. The Geekvape Aegis Mini 2 is available at £37.99 from Vape Portal UK.
Advanced Modes, Mini-Sized Body
Most compact mods in this size and price bracket offer little beyond standard variable wattage. The Aegis Mini 2 goes considerably further, carrying a full spread of firing modes usually reserved for larger, more expensive devices:
● Variable Wattage (VW): Standard power-based firing, adjustable across the full 5-100W range
● Temperature Control (TC): Output regulated by coil temperature rather than fixed wattage, usable between 100 and 315°C with compatible nickel, titanium, or stainless steel coils
● Variable Power Curve (VPC): Power delivery shaped across the length of a draw rather than held flat
● Bypass Mode: Output tied directly to battery voltage, without chip-managed regulation
● Stealth Mode: Dims the screen and reduces light output for lower-profile use
This range of modes on a device this size is genuinely uncommon, and it's paired with an A-Lock slide switch that disables the fire button entirely when toggled, rather than relying on a multi-click sequence.
Key Specs
● Battery: 2500 mAh, built-in, rechargeable
● Power output: 5-100 W
● Output voltage: 8.5 V
● Charging: USB-C, 5V/2A
● Tank: Z Nano 2, 3.5ml, top-fill
● Coils: B Series 0.2 ohm and 0.6 ohm, both included
● Screen: 1.08-inch colour display
● Protection rating: IP68 (water, dust, shock)
● Resistance range: 0.1-3.0 ohm
Features of Aegis Mini 2
Firing is done through a single intuitive button, with two adjustment buttons beside the screen used to set wattage or cycle through modes. The Z Nano 2 tank fills through a top cap and uses top-to-bottom airflow, aimed at a smoother draw than tanks with bottom-only intake. Coils press-fit into place, so switching between the preinstalled 0.2 ohm coil and the spare 0.6 ohm coil takes only a moment. A full charge from flat takes roughly 45-60 minutes over USB-C, and the port itself sits behind a flip cover to help maintain the device's water resistance.
What's in the Box?
● 1 x Geekvape Aegis Mini 2 (M100) Mod
● 1 x Geekvape Z Nano 2 Tank (3.5ml)
● 1 x B Series 0.2ohm coil (pre-installed)
● 1 x B Series 0.6ohm coil (spare)
● 1 x drip tip
● 1 x spare glass tube (2ml)
● 1 x USB Type-C cable
● 1 x spare parts pack
● 1 x user manual
Complete Specifications
|
Specifications
|
Details
|
|
Battery capacity
|
2500 mAh, built-in, rechargeable
|
|
Power output
|
5-100 W
|
|
Charging
|
USB-C, 5V/2A
|
|
Tank capacity
|
3.5ml (standard glass)
|
|
Filling system
|
Top-fill
|
|
Coil compatibility
|
Geekvape B Series
|
|
Coils included
|
0.2 ohm (pre-installed), ohm (spare)
|
|
Resistance range
|
0.1-3.0 ohm
|
|
Display
|
1.08-inch colour screen
|
|
Firing modes
|
VW, TC, VPC, Bypass, Stealth
|
|
Protection rating
|
IP68 (water, dust, shock resistant)
|
|
Safety features
|
A-Lock, short-circuit protection, 10-second cut-off, over-heat protection
|
|
Available colours
|
Silver, Grey, Navy Blue, Red, Rainbow, Classic Black
|