The Innokin Gomax Tube 80W kit is a vape pen system built around a 3000 mAh internal battery and a 5.5 mL disposable sub-ohm tank fitted with a 0.19 ohm Plex3D matrix mesh coil rated for 60-80 W. Rather than replacing just the coil when flavour drops off, the entire tank is refilled through a slide-to-fill top for as long as the coil performs, then swapped out as a complete unit once it's spent. Airflow is adjusted through a ring at the base of the tank, and a single button fires the device, with a tri-colour LED showing battery status. As a Gomax tube kit, it's built for DTL vaping with high-VG e-liquid. The Innokin Gomax Tube 80W Kit is available at £17.99 from Vape Portal UK.
The Tank Is the Coil
Most sub-ohm kits separate the tank from the coil, so a worn coil is unscrewed and replaced while the tank itself stays in use indefinitely. The Gomax tube works differently: the coil is sealed inside the tank, so when flavour or vapour production falls off, the whole tank is replaced rather than just the coil head. This removes coil-swapping and the risk of cross-threading a new coil, but it also means the tank has a shorter working life than a typical refillable tank, generally rated for around 15 refills before replacement.
Key Specs
● Battery: 3000 mAh, built-in, rechargeable
● Power output: 60-80W (fixed to tank resistance)
● Tank capacity: 5.5 mL, slide-to-fill top
● Coil: 0.19 ohm Plex3D matrix mesh, sealed inside the tank
● Charging: Micro-USB
● Airflow: adjustable ring, dual bottom intake
● Firing: single-button, tri-colour LED battery indicator
● Connection: 510 threaded
Everyday Use
The device fires with a single button, and the built-in chip reads the tank's coil resistance automatically to set the output within its 60-80 W range. Refilling is done by sliding open the top of the tank rather than unscrewing it, and the bottom airflow ring can be turned to shift the draw between a tighter, flavour-focused pull and a more open, cloud-focused one. A full charge from flat over micro-USB takes roughly 2.5 hours, and the tri-colour LED around the fire button gives a rough read on the remaining battery without needing a screen.
What's in the Box?
● 1 x Innokin Gomax Tube device (3000mAh)
● 1 x Gomax disposable sub-ohm tank (5.5 mL, coil pre-installed)
● 1 x Micro-USB charging cable
● 1-2 x user manual
Complete Specifications
|
Specifications
|
Details
|
|
Battery Capacity
|
3000mAh, built-in, rechargeable
|
|
Power Output
|
60-80W (auto-set to tank resistance)
|
|
Voltage output range
|
3.3-4.2 V
|
|
Tank capacity
|
5.5ml
|
|
Coil resistance
|
0.19 ohm Plex3D matrix mesh
|
|
Coil type
|
Sealed within the disposable tank
|
|
Filling system
|
Slide-to-fill top
|
|
Airflow control
|
Adjustable dual bottom ring
|
|
Charging
|
Micro-USB
|
|
Body material
|
Stainless steel
|
|
Connection
|
510 threaded
|
|
Draw style
|
Direct-to-lung (DTL), best suited to high-VG e-liquid
|
|
Available colours
|
Black, blue and pink
|